TSM 240
Class Information
Syllabus (Spring 2007) | 1/05/2007 | |
Syllabus (3rd Ed. of textbook) | 1/17/2007 | |
Review of Math Concepts | 8/25/2006 |
Lecture Notes
Strength of Materials | 1/05/2007 | |
Metallurgy | 1/29/2007 | |
Metallurgy 2 | 9/27/2006 | |
Fe-C Phase Diagram | 9/18/2006 | |
Polymers | 2/14/2007 | |
Manufacturing | 10/23/2006 | |
Net Shape Forming | 3/19/2007 | |
Machining and Welding | 4/09/2007 | |
Micro-fabrication | 12/08/2006 |
Plastic Lab
Plastics Labs | 8/30/2006 | |
Modulus of Composites | 9/06/2006 | |
Troubleshooting Injection Molding | 9/06/2006 | |
Injection Molding Manual | 9/06/2006 | |
Thermal Forming and Rotation Molding | 9/15/2006 | |
Blown Film | 9/27/2006 | |
FEA Basics | 10/02/2006 | |
Moldflow Basics | 10/02/2006 |
Metal Lab
Lathe RPM | 8/30/2006 | |
Speed Feed Calculations | 8/30/2006 |
Homework
Homework #1 | 1/31/2007 | |
Homework #2 | 2/16/2007 | |
Homework #3 | 3/19/2007 | |
Homework #4 | 4/13/2007 |
Homework Solutions
Homework #1 Solution | 2/16/2007 | |
Homework #2 Solution | 2/26/2007 | |
Homework #3 Solution | 4/09/2007 |
Iowa State University Department of Agricultural and Biosystems Engineering, 100 Davidson Hall , Ames, Iowa 50011, 515-294-1434, abe
iastate.edu
Copyright 2005, Iowa State University of Science and Technology. All rights reserved. Non-Discrimination Statement and Information Disclosures